Coating (Class 1000)

Coating (Class 1000)
Coating(Class1000)

High-precision thickness control and coating under clean environment (class 1000) are available with various coating methods and coaters for small pilot production and commercial production.

Equipment performance :

  1. Coater 4 lines (CR 2 lines / Non-CR 2 lines)
  2. Applicable film width : Max. 1,350mm
  3. Dryer zone length : 10-22m
  4. Drying temperature : Max. 140-200°C
  5. UV radiation, warming lamination and defect detection are available.
  6. Various coating methods are available

Specifications

Equipment Specifications C1 C2 W1 W2
Stage Head CR Class 100 CR Class 100 Semi-Clean Semi-Clean
Line CR Class 1000 CR Class 1000 Semi-Clean Semi-Clean
Coating Method 1 Wire Bar Wire Bar Roll Reverse Roll Reverse
2 Edge Die Edge Die Wire Bar Wire Bar
3 - Roll Reverse - -
Treating surface / Layer Outside/
2 Layers		 Out & Inside/
1 Layer		 Out & Inside/
2 Layers		 Outside /
2 Layers
Applicable Substrate Material PET, etc. PET PET PET
Thickness [μm]
(min-max)		 12-250 25-250 25-250 25-250
Substrate Width [mm] Max. 1,350 1,350 1,350 1,350
Min. 600 600 600 600
Coating Width [mm] Max. 1,300 1,300 1,300 1,300
Drying Temperature
[°C]		 Max. 200 180 180 140
Min. 90 90 90 90
Dryer Length [m, overall] 18.7
(5 zones)		 19
(5 zones)		 22
(5 zones)		 10.8
(3 zones)
Applicable Solvent Solvent-based Solvent-based Water-based Water-based
Others UV Radiation Warming Laminator Edge Trimmer Warming Laminator
Warming Laminator Edge Trimmer Defect Detector Corona Treatment
Defect Detector Defect Detector - IR Heater
- - - Edge Trimmer
- - - Defect Detector

For Contact

High-Tech Materials Department
11-2, Ginza 4-Chome, Chuo-Ku, Tokyo 104-8109, Japan
FAX: +81-3-3542-2170